Ravage 230W Vape Mod by Wismec
IN STOCK – Want this tomorrow?
Wismec introduce the Sinuous Ravage Box Mod, a high powered 230W mod powered by dual 18650 batteries. Featuring a stylish 1.45 inch colour display screen and an updated centred 510 connection. The Ravage includes a full temperature control suite with support for Ni200 Nickel, Titanium and Stainless Steel coils, as well as supporting TCR. With three button controls, two adjustment buttons and a squeeze fire button the Ravage is sleek, symmetrical and high performing.
Earn 549 Reward points when you purchase this item.
Applies only to registered customers.
Spend over £20 to get free UK delivery and a free gift
Same day dispatch on orders placed before 4pm - (Mon - Fri)
Ravage 230W Vape Mod by Wismec - Key Features
Another high-spec and beautifully designed mod from Wismec, as the name would suggest, the Ravage is capable of 230 watts of output with the help of its two 18650 batteries. A 1.45 inch full colour screen allows you to easily change your settings and the centrally mounted 510 connector pin means the Ravage can accommodate up to a 28mm diameter tank. The Ravage is a perfect partner to any of your favourite Sub Ohm tanks as well as RDAs and RTAs.
When you want to change your mode, you can adjust the wattage, temperature control and clock settings. Temperature control has defaults for Ni200, Ti, and SS316 wire but this mod can operate as low as 100 degrees up to a massive 315 degrees celsius. The display has different screen options too depending on what you want to see. You'll be able to easily view voltage, battery life, coil resistance, the time and of course either wattage or temperature depending on your mode selection.
If you want to combine this mod with an RDA, the coil resistance options available to you are very broad too. In temperature control mode you can create a build anywhere between 0.05 Ohms to 1.5 Ohms and on wattage mode 0.1 to 3.5 Ohms. All in all, the world is your vaping oyster with the Wismec Ravage. You have complete control over all your settings in a beautifully designed and high quality mod.
Sub Ohm Vaping
Sub Ohm vaping is when the coil in the tank is less than 1.0 Ohm resistance. They're typically larger and with these, you use the DTL (direct to lung) method of deeply inhaling directly into the lungs, bypassing the mouth. Combined with Sub Ohm tanks and high-powered batteries, these devices create more vapour and offer more intense flavour delivery than their mouth-to-lung counterparts.
Much like any other electronic device, you want to take care of them properly especially when they're charging. Make sure you use the right kind of charger for your device or batteries - this means you can recharge safely. When you are charging, don't cover your vape or batteries up and never leave them charging overnight - you can overcharge them, reducing their life span and if they don't have a function that stops charge from running when they're full you can cause battery failure too. If a battery doesn't look right, or gets really hot when you're vaping - stop using it. All batteries have a limited life so you'll want to replace them or re-wrap them if they start peeling.
Additional InformationWismec Ravage 230W Vape Mod Features:
- Size: 43.6 x 30.0 x 83.4mm
- Weight: 147.3g
- Thread Type: 510 spring loaded connector
- Battery Type: Dual 18650 batteries (discharging current should be above 25A)
- Output Mode: VW/TC-Ni/TC-Ti/TC-SS/TCR mode
- Output Wattage: 1-230W
- Resistance Range: 0.05-1.5ohm for TC modes 0.1-3.5ohm for VW mode
- Temperature Range: 100-315°C/200-600°F (TC modes)
- Maximum Charging Current: 2A
- Maximum Output Current: 50A
- Output Voltage Range: 0.5-9V
- Wismec Sinuous Ravage 230W Box Mod
- QC USB Cable
- User Manuals
- Warning Card
SAME DAY DISPATCH
WHEN YOU ORDER BEFORE 4PM
FREE DELIVERY & GIFT
ON ALL ORDERS OVER £20