IPV 4 100W Box Mod

The IPV 4 100W box mod is a serious bit of kit. It’s one of the most powerful and innovative mods available and offers vapers complete control over their preferred vape settings. A potential 100W voltage output and the ability to fire atomizers as low as 0.10ohms make sub-ohm vaping a piece of cake. It’s compatible with almost all 510 connection tanks and can be converted to an eGo threaded using a simple connector.

The IPV 4 is a controlled mod and comes updated and equipped with a YiHi SX330-V4S allowing full temperature control to be utilized. It has a spring loaded 510 connection as standard giving a clean and tight connection to your chosen tank. The IPV4’s engineered aluminium case has space for two 18650 flat top batteries which increases the capacity and output of the mod. It also offers longer lasting performance at a higher wattage thanks in part to the longevity of the battery life.

All settings are controlled via the clear OLED display screen, which shows the IPV4’s wattage, voltage, battery life and current ohm resistance. It’s via this display and using the adjacent silver buttons you can adjust the variable voltage. It has all the standard safety features including short circuit protection, temperature overheat protection and battery low voltage protection.

The IPV4 is a well-made powerful, box mod for the serious vaper! 

Availability: In stock




Product Description


Kit Content:

  • 1 x IPV4 device
  • 1 x User manual
  • 1 x Gift box
  • 1 x USB cable

Features and Specs:

  • 510 threaded connection
  • Output wattage range: 10w - 100 w
  • atomizer resistance: 0.10 ohm - 3.0 ohm
  • Utilizes two high amp 18650 batteries (sold separately)
  • Black billet aluminum body
  • Temp control feature
  • Custom milled display screen with a flush fit to the outside of the box
  • Dome style fire button and up/down buttons
  • Yihi sx330-v4s chip
  • Spring loaded atomizer contact pin – cleaner contact with tank
  • Reverse polarity protection
  • Battery low voltage protection
  • Low resistance protection
  • Temperature overheat protection
  • Output short circuit protection

NOTE: The IPV4 Mod requires two 18650 IMR battery. It will work with flat top IMR's and Hybrid 18650 batteries. The IPV4 cannot be recharged by an eGo battery charger, you should take out the battery to charge.

Temperature control requires the use of nickel or titanium wire coils.

Never use non-rechargeable batteries in this or any other e-cig device! Only use the recommended batteries for this unit, it's for your safety.

Additional Information

Additional Information

ModsVariable Voltage & Wattage (VV/VW)


Customer Reviews (2)

No worry about battery safetyReview by Erick
I don't have any of the battery safety issues I seemed to have with other mods after I bought this IPV. It's still not something I'd recommend to those who haven't been vaping very long, but a friend recommended this to me after I mentioned my problems, and now I have to call to thank him. (Posted on 27/07/2016)
Simply the best!Review by Steve
Decent mod worth the extra spend. Vape Superstore also through in a free liquid of my choice, thumbs up guys! (Posted on 18/08/2015)

Write Your Own Review

You're reviewing: IPV 4 100W Box Mod

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars

Heres some other bits we think you will like:

Wismec RX200 TC Mod

Wismec RX200 TC Mod

1 Review(s)
Wismec Presa TC 100W Mod

Wismec Presa TC 100W Mod

1 Review(s)


3 Review(s)

Regular Price: £48.95

Special Price £44.95

Tesla Invader 3 240W Mod

Tesla Invader 3 240W Mod

3 Review(s)