Kanger EVOD 2 Atomizer

Product In stock

The Kanger EVOD 2 is a stylish bottom dual coil (BDC) clearomizer from our friends at Kangertech. The BDC technology has a larger larger heating area and is known to produce a warmer, thicker and cleaner tasting vapor helping emphasise the depth of flavour in your chosen e-liquid.

The EVOD 2 also features replaceable atomizer heads which allow users to up the resistance with the clearomizer working well between 1.5 ohm and 2.0 ohm. The liquid capacity is also good, sitting at 2 ml, meaning you won’t need to keep refilling. It’s filled from the bottom which means if the EVOD 2 base fails it can be easily replaced without wasting any juice. It comes available in three colours, blue, green, purple and pink.

The Kanger EVOD 2 is specifically designed to fit an eGo battery. If you plan on using the atomizer with a more powerful MOD like the e-leak or SMOK Xpro you will need an eGo connector, which converts it to a 510 fitting. 

* Required Fields

    • Earn 149 Reward point(s) when you purchase this item. Saving you £0.45!
    • Applies only to registered customers, may vary when logged in.


Kit Contents:

  • 1 x Kanger Evod 2 Dual Bottom Coil (BDC) Tank


  • 2ml Capacity
  • 1.5 ohm atomizer head
  • Bottom Dual Coil (BDC) (same as Protank 3 and Aerotank)
  • Stainless Steel Construction.
  • Polycarbonate tank.
  • Removable drip tip. (uses standard 510 drip tips)
  • Height: 64.5mm (2.54 inches)
  • Diameter: 14.5mm (0.57 inches)
  • Weight: 32g (1.1 ounce)


  • eGo threaded
  • 510 compatible with relevant connector

How to fill/refill:

  1. Unscrew the base of the clearomizer (the part that screws into the battery).
  2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor.
  3. Fill your liquid into the tank, making sure to pour it in from the side, so that the liquid is cascading down the sides of the tank walls. Try not to get any liquid into the center airflow hole as this will cause flooding or gurgling sound when used.
  4. Screw the base back onto the clearomizer body.
  5. Screw the clearomizer onto your battery.

How to Replace the Kanger EVOD 2 Atomizer Coil:

  1. Detach the clearomizer from the battery.
  2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor.
  3. Unscrew the base from the body of the clearomizer. The base is the metal part that screws onto the battery.
  4. The atomizer head will be the long, thin part that is attached to the base that you just unscrewed. Unscrew the head from the base and throw it away.
  5. Screw a new atomizer coil securely onto the base.
  6. Screw the base back onto the body of the clearomizer.
  7. Screw the entire clearomizer back onto the battery.

Important Notes:

The Original Kanger EVOD Replacement Coils WILL NOT Work With The EVOD2.

This clearomizer is eGo threaded and not 510 compatible as standard. It is compatible with Ego series batteries such as the eGo CE4 Twist and Vision Spinner III batteries. To use with a 510 threaded MOD like you will need a 510 to Ego Adapter. 

Additional Information

TypesDual Coil, 510 Thread / Ego Compatible

Customer Reviews

This product has no reviews yet.

Verify your Age

This Website requires you to be 18 years or older to enter.

Sorry Adults Only