- 1 x TF-RTA Tank (24.5mm
- 1 x TF-RTA G2 Deck (Pre-installed)
- 1 x Cross Point Screwdriver for G2 Deck
- 1 x Replacement Glass Tube
- 1 x Smok Vape Band
- Spare Parts
Smok TF-RTA G2 SS Edition Features:
- Dual Post Velocity Style
- 16mm Big Build Deck
- 0.14ohm (Pre-installed)
- Material: Glass & Stainless Steel
- Weight: 84.5g
- Dimension: 65mm x 24.5mm
- Thread: 510
- Capacity: 4.5ml
- Double Layered Drip Tip (Heat Protection)
- Swivel Cap Top Fill
- Leak Free Design
How to build the RTA(G2)
- Before starting make sure your hands are clean.
- Taking the TF-RTA G2 deck apart.
- Installing the pre-wrapped coil. Insert one end of your coil into the up-side screw, and the other end into the down-side screw.
- Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole, and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.
- Cutting a strip of cotton and make sure it’s just larger than the coil you built. 6.Inserting the cotton, and placing it in the middle.
- Cutting the wick at an angle and make sure it’s not too short and not too long.
- Wet the coil with your e-liquid and adjust the wick.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.
|Types||Dual Coil, Organic Cotton Coil (OCC), Rebuildable Atomizers (RBA), 510 Thread / Ego Compatible, Sub Ohm|
Posted on 16-Jan-2017