Wismec RX2/3 Mod
IN STOCK – Want this tomorrow?
Wismec have pushed the boundary again with the RX 2/3 Box Mod. They have used the original design of the RX200S and changed the battery design to hold two or three batteries depending on your preference. The RX 2/3 Mod comes with 2 replaceable covers which changes it from a three battery design to a two battery design. You have the option of a 150 watts or 200 watts of output depending on your choice of battery configuration.
Earn 559 Reward point(s) when you purchase this item. Earning you £2.80!
Applies only to registered customers, may vary when logged in.
Spend over £20 to get FREE DELIVERY and a FREE GIFT
A remarkably high powered mod, the Wismec RX2/3 is capable of 150 to 200 watts depending on whether you go for the two or three 18650 battery configuration. Through the battery back cover lock button, you can replace the back cover for two or three cells to your preference. It can fit large atomisers on top and the exquisite stainless steel spring loaded 510 connector makes the device wear-resistant and adaptable. The large screen shows you all your important vaping information, from wattage and temperature to resistance, amps and battery life.
Its chipset is equipped with wattage mode, temperature control, TCR and support for nickel, titanium and stainless steel coils. It's a perfect mod to pair with your favourite RDAs and RTAs to get maximum cloud production. In temperature control mode you can range between 100-315 degrees celsius and fire or build coils as low as 0.05 Ohms and 0.1 Ohms in wattage mode. By connecting the device with a computer through the micro USB port, you can download the file to add the custom logo to your Reuleaux RX2/3 and make the device always up-to-date.
Sub Ohm Vaping
Sub Ohm vaping is when the coil in the tank is less than 1.0 Ohm resistance. They're typically larger and with these, you use the DTL (direct to lung) method of deeply inhaling directly into the lungs, bypassing the mouth. Combined with Sub Ohm tanks and high-powered batteries, these devices create more vapour and offer more intense flavour delivery than their mouth-to-lung counterparts.
Much like any other electronic device, you want to take care of them properly especially when they're charging. Make sure you use the right kind of charger for your device or batteries - this means you can recharge safely. When you are charging, don't cover your vape or batteries up and never leave them charging overnight - you can overcharge them, reducing their life span and if they don't have a function that stops charge from running when they're full you can cause battery failure too. If a battery doesn't look right, or gets really hot when you're vaping - stop using it. All batteries have a limited life so you'll want to replace them or re-wrap them if they start peeling.
Wismec RX2/3 Mod Features:
- Size: 40.2*34.5*88.7mm (for 2 cells)
- Size: 40.2*50.1*88.7mm (for 3 cells)
- Thread Type: 510 spring loaded thread
- Cell type: High-rate 18650 cell
- Cell type: (discharging current should be above 25A)
- Output Mode: VW/TC-Ni/TC-Ti/TC-SS/TCR Mode
- Output Wattage: 1-150W (for 2 cells)/1-200W (for 3 cells)
- Resistance Range: 0.05-1.5ohm for TC modes
- Resistance Range:0.1-3.5ohm for VW mode
- Temperature Range: 100-315°C/ 200-600°F (TC modes)
- Replaceable Back Cover
- Optional High Power Output
- Variable Temperature Control System
- Reverse Polarity Protection
- Spring Loaded 510 Connector
- Upgradeable Firmware
- 1 x Reuleaux RX2/3
- 1 x Replacement Back Cover (when using two batteries)
- 1 x USB Cable
- 1 x User Manual
- 1 x Warning Card
Delivery & Collection
NEXT WORKING DAY DELIVERY
WHEN YOU ORDER BEFORE 4PM
ON ALL ORDERS OVER £20
When you spend over £20